6665K32
$223.56
$0.00
| Mounted Bearing Type | Two-Bolt Flange Mount |
| Bearing Type | Ball |
| Housing Material | Powder-Coated Cast Iron |
| Shaft Mount Type | Set Screw |
| For Shaft Diameter | 5/8" |
| Overall Height | 2 5/16" |
| Overall Length | 3 7/8" |
| Overall Width | 1 9/32" |
| Dynamic Radial Load Capacity | 2,600 lb. |
| Maximum Rotation Speed | 3,200 rpm |
| Bearing Material | Steel |
| Bearing Seal Type | Sealed |
| Misalignment Capability | 2° |
| ABEC Rating | 1 |
| Alignment Style | Self-Aligning |
| For Load Direction | Radial |
| For Shaft Type | Round |
| Grease Fitting Included | Yes |
| Product ID | 0.625" |
| ID Tolerance | 0" to 0.0006" |
| Lubrication | Lubricated |
| Mounting Hole Hole Center to Center | 3" |
| Mounting Hole Fasteners Included | No |
| Number of Set Screws Included | 2 |
| Performance | High Temperature |
| Set Screw Thread Size | 1/4"-28 |
| Static Radial Load Capacity | 1,400 lb. |
| System of Measurement | Inch |
| Temperature | -20° F to 400° F |
| Country of Origin | United States |
| DFARS Compliance | Specialty Metals COTS-Exempt |
| ECCN | 1C999 |
| REACH Compliance | Not Compliant |
| RoHS Compliance | RoHS 3 (2015/863/EU) Compliant |
| Schedule B Number | 848320.001 |
| Flange Thickness | 7/16" |
| Mounting Hole Hole Diameter | 13/32" |
| Grease Fitting Thread Size | 1/4"-28 |
| Grease Fitting Thread Type | UNF |
| Lubricant | Synthetic Grease with Lithium Thickener |
| Manufacturer | Sealmaster |
| Product Description | Packed with heat-stable synthetic grease, these bearings keep their cool when machinery runs hot. Install them in applications as hot as 400° F, where standard, mineral-based lubricants would burn off. The balls roll nearly friction-free within a sturdy housing to support shafts as they turn. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearings in tip-top shape. These bearings are sealed to block out dust and contaminants. Powder - Coated Cast Iron Housing — A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. Sealmaster — Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew. |
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at