6661K23 Ball Bearings with Retaining Ring

$45.44

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

6661K23

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	15 mm
For Housing ID	32 mm
Width	9 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	14,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-40° F
Temperature Range Max	210° F
Bearing Trade Number	6002-2RS
Ball Bearing Profile	With Retaining Ring
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	15 mm
ID Tolerance	-0.008 mm to 0 mm
Lubricant	Grease
OD	32 mm
OD Tolerance	-0.011 mm to 0 mm
Radial Clearance	0.011 mm to 0.025 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5048
Seal Material	Buna-N
Dynamic Radial Load Capacity	1,250 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	640 lb.
Retaining Ring OD	36.7 mm
Retaining Ring Thickness	1.12 mm

6661K23 Ball Bearings with Retaining Ring

$45.44 $0.00

Bulk orders will be discounted, please contact us.

No need for complicated tools— install these bearings by hand inside a housing. The ring stops the bearing from being jostled out of place when it experiences sudden forces parallel to the shaft (thrust loads). Sealed — The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 6661K23

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	15 mm
For Housing ID	32 mm
Width	9 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	14,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-40° F
Temperature Range Max	210° F
Bearing Trade Number	6002-2RS
Ball Bearing Profile	With Retaining Ring
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	15 mm
ID Tolerance	-0.008 mm to 0 mm
Lubricant	Grease
OD	32 mm
OD Tolerance	-0.011 mm to 0 mm
Radial Clearance	0.011 mm to 0.025 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5048
Seal Material	Buna-N
Dynamic Radial Load Capacity	1,250 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	640 lb.
Retaining Ring OD	36.7 mm
Retaining Ring Thickness	1.12 mm