2820T61 Dry-Running Mounted Sleeve Bearings

$35.13 $54.04

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

2820T61

Additional info

Mounted Bearing Type	Base Mount
Bearing Type	Plain
Housing Material	Aluminum
Shaft Mount Type	Press Fit
For Shaft Diameter	25 mm
Center Height	32 mm
Overall Height	65 mm
Overall Length	127 mm
Overall Width	22.8 mm
Bearing Material	PTFE
Misalignment Capability	5°
Alignment Style	Self-Aligning
For Load Direction	Radial
For Shaft Type	Round
Product ID	24.98 mm
ID Tolerance	-0.021 mm to 0 mm
Lubrication	Not Required
Mounting Hole Hole Center to Center	101.5 mm
Mounting Hole Number of Holes	2
Mounting Hole Fasteners Included	No
Performance	Dry Running, High Load, Ultra Low Friction
System of Measurement	Metric
Temperature	-40° F to 280° F
Country of Origin	United States
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848330.809
Mounting Hole Hole Diameter	14.5 mm
Plain Bearing Type	Sleeve
Backing Material	Bronze
Bearing Width	22.8 mm
P Max	8,000 psi
PV Max	50,000
V Max	400 sfpm
Product Description	Leave the lubricant in the supply closet— these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

34%

2820T61 Dry-Running Mounted Sleeve Bearings

$35.13 $54.04

Bulk orders will be discounted, please contact us.

Leave the lubricant in the supply closet— these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn. High - Load Bronze - Backed PTFE — Reinforced with metal, these slick PTFE bearings carry load ratings at least seven times greater than any plastic alternative. The slippery material is a good fit for conveyors and other machinery with frequent starts and stops. Aluminum Housing — One-third the weight of cast iron but not as strong. Aluminum also resists corrosion. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Product Number: 2820T61

Add to Wishlist Add to Compare

SEND INQUIRY

Description

Mounted Bearing Type	Base Mount
Bearing Type	Plain
Housing Material	Aluminum
Shaft Mount Type	Press Fit
For Shaft Diameter	25 mm
Center Height	32 mm
Overall Height	65 mm
Overall Length	127 mm
Overall Width	22.8 mm
Bearing Material	PTFE
Misalignment Capability	5°
Alignment Style	Self-Aligning
For Load Direction	Radial
For Shaft Type	Round
Product ID	24.98 mm
ID Tolerance	-0.021 mm to 0 mm
Lubrication	Not Required
Mounting Hole Hole Center to Center	101.5 mm
Mounting Hole Number of Holes	2
Mounting Hole Fasteners Included	No
Performance	Dry Running, High Load, Ultra Low Friction
System of Measurement	Metric
Temperature	-40° F to 280° F
Country of Origin	United States
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848330.809
Mounting Hole Hole Diameter	14.5 mm
Plain Bearing Type	Sleeve
Backing Material	Bronze
Bearing Width	22.8 mm
P Max	8,000 psi
PV Max	50,000
V Max	400 sfpm
Product Description	Leave the lubricant in the supply closet— these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.