1301N214 Dry-Running Flanged Ball Bearings

$12.88 $19.82

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

1301N214

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	28 mm
Width	9 mm
ABEC Rating	Not Rated
Material	Acetal
Maximum Rotation Speed	1,700 rpm
Lubrication	Not Required
Temperature Range Minimum	-40° F
Temperature Range Max	175° F
Bearing Trade Number	6001
Ball Bearing Profile	Flanged
Ball Material	316 Stainless Steel
Bearing Type	Ball
Cage Material	Nylon
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.05 mm to 0.05 mm
OD	28 mm
OD Tolerance	-0.05 mm to 0.05 mm
Performance	Dry Running, Moisture Resistant
Radial Clearance	0.08 mm to 0.2 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Germany
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (01/21/2025, 247 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Shield Material	Nylon
Dynamic Radial Load Capacity	30 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	25 lb.
Flange OD	30 mm
Flange Thk	2 mm
Width Minimum Tolerance	Not Rated
Width Maximum Tolerance	Not Rated
Product Description	Don't risk your bearing popping out of place or making a mess. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock these bearings off- kilter. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Acetal — The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear. 316 Stainless Steel Balls — Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

35%

1301N214 Dry-Running Flanged Ball Bearings

$12.88 $19.82

Bulk orders will be discounted, please contact us.

Don't risk your bearing popping out of place or making a mess. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock these bearings off- kilter. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Acetal — The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear. 316 Stainless Steel Balls — Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Product Number: 1301N214

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	28 mm
Width	9 mm
ABEC Rating	Not Rated
Material	Acetal
Maximum Rotation Speed	1,700 rpm
Lubrication	Not Required
Temperature Range Minimum	-40° F
Temperature Range Max	175° F
Bearing Trade Number	6001
Ball Bearing Profile	Flanged
Ball Material	316 Stainless Steel
Bearing Type	Ball
Cage Material	Nylon
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.05 mm to 0.05 mm
OD	28 mm
OD Tolerance	-0.05 mm to 0.05 mm
Performance	Dry Running, Moisture Resistant
Radial Clearance	0.08 mm to 0.2 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Germany
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (01/21/2025, 247 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Shield Material	Nylon
Dynamic Radial Load Capacity	30 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	25 lb.
Flange OD	30 mm
Flange Thk	2 mm
Width Minimum Tolerance	Not Rated
Width Maximum Tolerance	Not Rated
Product Description	Don't risk your bearing popping out of place or making a mess. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock these bearings off- kilter. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Acetal — The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear. 316 Stainless Steel Balls — Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.