1258N27 High-Temperature Graphite-Lubricated Ball Bearings

$129.60

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

1258N27

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	32 mm
Width	10 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	400 rpm
Lubrication	Lubricated
Temperature Range Minimum	-70° F
Temperature Range Max	660° F
Bearing Trade Number	6201-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Graphite
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.008 mm to 0 mm
Lubricant	Graphite
OD	32 mm
OD Tolerance	-0.011 mm to 0 mm
Performance	High Temperature
Radial Clearance	0.112 mm to 0.16 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Sweden
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C998
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848330.809
Shield Material	Steel
Dynamic Radial Load Capacity	1,600 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	690 lb.

1258N27 High-Temperature Graphite-Lubricated Ball Bearings

$129.60 $0.00

Bulk orders will be discounted, please contact us.

Keep parts spinning in industrial ovens and other places as hot as 660° F. Greased with graphite lubricant, these bearings stay slippery where oil would burn off or solidify. You can install and forget them since the lubricant lasts forever. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 1258N27

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	32 mm
Width	10 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	400 rpm
Lubrication	Lubricated
Temperature Range Minimum	-70° F
Temperature Range Max	660° F
Bearing Trade Number	6201-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Graphite
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.008 mm to 0 mm
Lubricant	Graphite
OD	32 mm
OD Tolerance	-0.011 mm to 0 mm
Performance	High Temperature
Radial Clearance	0.112 mm to 0.16 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Sweden
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C998
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848330.809
Shield Material	Steel
Dynamic Radial Load Capacity	1,600 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	690 lb.