FilterClear All

• End Type
  • With Retaining Ring Grooves
  • With Shaft Collar
• Material
  • 1215 Carbon Steel
  • Zinc-Plated 1215 Carbon Steel
• Diameter
  • 1"
  • 1/2"
  • 1/4"
  • 10mm
  • 12mm
  • 1 1/2"
  • 20mm
  • 3/4"
  • 3/8"
  • 5/8"
  • 8mm
• Diameter Tolerance
  • -0.0005" to 0"
  • -0.003" to 0"
  • -0.05mm to 0mm
• Length
  • 1 1/16"
  • 11mm
  • 12mm
  • 15mm
  • 1 1/2"
  • 1 1/4"
  • 2 1/2"
  • 2 7/16"
  • 3/8"
  • 3 1/2"
  • 3 1/4"
  • 5/8"
  • 5 1/4"
  • 7/16"
  • 9mm
• Length Tolerance
  • 0" to 0.01"
  • 0mm to 0.254mm
• Straightness Tolerance
  • 0.001" per ft.
  • 0.002" per ft.
  • 0.003" per ft.
  • 0.18 mm per 300 mm
  • Not Rated
• Hardness Rating
  • Medium
  • Not Rated
  • Very Hard
• Hardness
  • Not Rated
  • Rockwell B84
  • Rockwell C58
• Mechanical Finish
  • Turned, Precision Ground
  • Turned, Precision Ground, Polished
• System of Measurement
  • Inch
  • Metric
• REACH
  • Not Compliant
  • R (EC 1907/2006) (01/21/2025, 247 SVHC) Compliant
• Schedule B
  • 848390.95
  • 848790.008
• Overall Length
  • 2 9/32"
  • 1 1/16"
  • 1 19/32"
  • 1 25/32"
  • 1 7/32"
  • 1 9/16"
  • 2"
  • 28mm
  • 34mm
  • 35mm
  • 3 3/8"
  • 45mm
  • 4 3/8"
  • 5 11/16"
  • 5 3/8"
  • 7 11/16"
• Includes
  • Grease Fitting
  • Retaining Ring, Spacer
  • Retaining Ring, Spacers
• Groove Width
  • 0.029"
  • 0.039"
  • 0.046"
  • 0.056"
  • 0.733mm
  • 0.99mm
  • 1.422mm
• Groove Diameter
  • 0.21"
  • 0.303"
  • 0.396"
  • 0.485"
  • 0.58"
  • 0.835"
  • 14.73mm
  • 6.35mm
  • 7.69mm
  • 8.71mm
• End to Groove Length
  • 0.063"
  • 0.125"
  • 2.56mm
  • 3.12mm
  • 4.06mm
• Pitch
  • 1 mm
  • 1.25 mm
  • 1.75 mm
• Thread Length
  • 1 5/16"
  • 1/2"
  • 10.66mm
  • 11/32"
  • 15/16"
  • 16mm
  • 17/32"
  • 21/64"
  • 45/64"
  • 7/16"
  • 7/8"
  • 8mm
• Thread Size
  • 1"-14
  • 1/2"-13
  • 1/2"-20
  • 1/4"-20
  • 3/4"-16
  • 3/8"-16
  • 5/16"-18
  • M12
  • M6
  • M8
• Overall Diameter
  • 1 1/2"
  • 1 1/4"
  • 1 1/8"
  • 1"
  • 1/2"
  • 15mm
  • 19mm
  • 2 1/4"
  • 22mm
  • 3/4"
  • 31mm
• Product Description
  • Thread these shafts into a tapped hole to support idler sprockets and pulleys in tensioning applications. Shafts with a shaft collar come with a grease fitting for easy lubrication of your pulleys and sprockets. Adjust the collar to the width of your component.
  • Thread these shafts into a tapped hole to support idler sprockets and pulleys in tensioning applications. Shafts with retaining ring grooves come with a retaining ring and spacers to position your component and hold it in place.

Inquiry