FilterClear All

• Housing Material
  • 440C Stainless Steel
  • Steel
• For Shaft Diameter
  • 1/4"
  • 1/8"
  • 10 mm
  • 3/16"
  • 3/8"
  • 4 mm
  • 5 mm
  • 5/16"
  • 6 mm
  • 8 mm
• Dynamic Radial Load Capacity
  • 120 lb.
  • 325 lb.
  • 380 lb.
  • 385 lb.
  • 55 lb.
  • 65 lb.
• Maximum Rotation Speed
  • 18,500 rpm
  • 20,000 rpm
  • 36,000 rpm
  • 37,000 rpm
  • 40,000 rpm
• Bearing Material
  • 440C Stainless Steel
  • Steel
• Bearing Seal Type
  • Open
  • Sealed
  • Shielded
• Product ID
  • 0.25"
  • 0.3125"
  • 0.375"
  • 1/4"
  • 1/8"
  • 10 mm
  • 3/16"
  • 3/8"
  • 4 mm
  • 5 mm
  • 5/16"
  • 6 mm
  • 8 mm
• ID Tolerance
  • -0.0003" to 0"
  • -0.007 mm to 0 mm
• Static Radial Load Capacity
  • 140 lb.
  • 180 lb.
  • 20 lb.
  • 25 lb.
  • 60 lb.
• System of Measurement
  • Inch
  • Metric
• Flange Thickness
  • 0.03"
  • 0.06"
  • 0.074"
  • 0.75 mm
  • 1.5 mm
  • 1.9 mm
• Panel Mount Type
  • Clinch
  • Press Fit
• OD
  • 0.64"
  • 0.645"
  • 0.944"
  • 0.947"
  • 16.256 mm
  • 16.38 mm
  • 23.977 mm
  • 24.05 mm
• OD Tolerance
  • -0.001" to 0.002"
  • -0.0015" to 0.0015"
  • -0.025 mm to 0.051 mm
  • -0.038 mm to 0.038 mm
  • 0 mm to 0.07 mm
  • 0" to 0.003"
• Width
  • 0.283"
  • 0.37"
  • 10 mm
  • 3/8"
  • 7.188 mm
  • 7.2 mm
  • 9.398 mm
  • 9/32"
• Width Tolerance
  • -0.01" to 0.01"
  • -0.015" to 0.015"
  • -0.254 mm to 0.254 mm
  • -0.381 mm to 0.381 mm
• Flange OD
  • 0.69"
  • 1"
  • 17.5 mm
  • 25.4 mm
• Radial Clearance
  • -0.0002" to 0.0004"
  • -0.0003" to 0.0009"
  • -0.005 mm to 0.01 mm
  • -0.008 mm to 0.023 mm
  • 0.0003" to 0.0009"
  • 0.008 mm to 0.023 mm
• Product Description
  • Smoother than smooth— the balls inside roll nearly friction-free to support smooth rotation. They mount securely in thin panels. All bearings come lubricated. Plan to relubricate regularly to keep them in tip-top shape. Seals and shields hold lubricant in while keeping dust and contaminants out. Open bearings require more frequent relubrication. Press - Fit Panel Mount — Press these bearings into plastic panels or thin sheet metal to mount them by hand. They're a good fit for tight spaces, or if you'd like a removable mounting option. The sturdy flange prevents bearings from pulling through, giving you added stability. Press Fit — For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside roll nearly friction-free to support smooth rotation. They mount securely in thin panels. All bearings come lubricated. Plan to relubricate regularly to keep them in tip-top shape. Seals and shields hold lubricant in while keeping dust and contaminants out. Open bearings require more frequent relubrication. Steel Housing — Best for dry environments as moisture will cause them to rust. Clinch Panel Mount — Secure these self-clinching bearings into sheet metal panels for a permanent hold. Install them using an air-powered or hydraulic press— no need for precision-bored holes or machined mounts. They're not for use in plastic panels. Press Fit — For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside roll nearly friction-free to support smooth rotation. They mount securely in thin panels. All bearings come lubricated. Plan to relubricate regularly to keep them in tip-top shape. Seals and shields hold lubricant in while keeping dust and contaminants out. Open bearings require more frequent relubrication. Steel Housing — Best for dry environments as moisture will cause them to rust. Press - Fit Panel Mount — Press these bearings into plastic panels or thin sheet metal to mount them by hand. They're a good fit for tight spaces, or if you'd like a removable mounting option. The sturdy flange prevents bearings from pulling through, giving you added stability. Press Fit — For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Inquiry