1293N3
$22.34
$0.00
| Mounted Bearing Type | Panel Mount |
| Bearing Type | Ball |
| Housing Material | Steel |
| Shaft Mount Type | Press Fit |
| For Shaft Diameter | 8 mm |
| Dynamic Radial Load Capacity | 120 lb. |
| Maximum Rotation Speed | 40,000 rpm |
| Bearing Material | Steel |
| Bearing Seal Type | Shielded |
| Misalignment Capability | 5° |
| ABEC Rating | 3 |
| Alignment Style | Self-Aligning |
| For Load Direction | Radial |
| For Shaft Type | Round |
| Product ID | 8 mm |
| ID Tolerance | -0.007 mm to 0 mm |
| Lubrication | Lubricated |
| Static Radial Load Capacity | 60 lb. |
| System of Measurement | Metric |
| Temperature | -30° F to 250° F |
| Country of Origin | United States |
| DFARS Compliance | Specialty Metals COTS-Exempt |
| ECCN | 1C999 |
| REACH Compliance | REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant |
| RoHS Compliance | RoHS 3 (2015/863/EU) Compliant |
| Schedule B Number | 848210.5044 |
| Flange Thickness | 1.5 mm |
| Panel Mount Type | Clinch |
| OD | 16.256 mm |
| OD Tolerance | 0 mm to 0.07 mm |
| Width | 7.188 mm |
| Width Tolerance | -0.254 mm to 0.254 mm |
| Flange OD | 17.5 mm |
| Lubricant | Grease |
| Radial Clearance Trade Number | C3 |
| Radial Clearance | 0.008 mm to 0.023 mm |
| Product Description | Smoother than smooth— the balls inside roll nearly friction-free to support smooth rotation. They mount securely in thin panels. All bearings come lubricated. Plan to relubricate regularly to keep them in tip-top shape. Seals and shields hold lubricant in while keeping dust and contaminants out. Open bearings require more frequent relubrication. Steel Housing — Best for dry environments as moisture will cause them to rust. Clinch Panel Mount — Secure these self-clinching bearings into sheet metal panels for a permanent hold. Install them using an air-powered or hydraulic press— no need for precision-bored holes or machined mounts. They're not for use in plastic panels. Press Fit — For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew. |
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at