FilterClear All

• Shaft Mount Type
  • Concentric Lock
  • Set Screw
• For Shaft Diameter
  • 1 1/2"
  • 1 1/4"
  • 1 3/8"
  • 1 7/16"
  • 1"
  • 2 7/16"
  • 2"
  • 20mm
  • 25mm
  • 3/4"
  • 50mm
• Overall Height
  • 1 3/4"
  • 1 7/16"
  • 1 9/32"
  • 2 1/64"
  • 2 11/16"
  • 2 5/16"
  • 32.5mm
  • 36.5mm
  • 54.8mm
• Overall Length
  • 142.89999mm
  • 3 3/4"
  • 3 3/8"
  • 4 5/8"
  • 5 1/8"
  • 6 3/8"
  • 6 7/8"
  • 85.7mm
  • 95.3mm
• Overall Width
  • 2 1/4"
  • 2 19/64"
  • 2 3/4"
  • 2 7/16"
  • 3 1/64"
  • 3 13/32"
  • 3 51/64"
  • 58.3mm
  • 61.9mm
  • 77.4mm
• Product ID
  • 0.75"
  • 1"
  • 1.25"
  • 1.375"
  • 1.4375"
  • 1.5"
  • 2"
  • 2.4375"
  • 20mm
  • 25mm
  • 50mm
• ID Tolerance
  • 0" to 0.0008"
  • 0" to 0.0009"
  • 0" to 0.001"
  • 0mm to 0.02mm
• Set Screw Thread Size
  • 1/4"-28
  • 45954
  • 5/16"-24
  • 8-32
• Flange Thickness
  • 11.1mm
  • 13.5mm
  • 13/16"
  • 14.3mm
  • 17/32"
  • 7/16"
  • 9/16"
• Mounting Hole Diameter
  • 1/2"
  • 11.1mm
  • 14.2mm
  • 3/8"
  • 5/8"
  • 7/16"
  • 9.5mm
• Mounting Hole Center to Center
  • 111.1mm
  • 2 1/2"
  • 2 3/4"
  • 3 5/8"
  • 4"
  • 5 1/8"
  • 5 5/8"
  • 63.5mm
  • 69.9mm
• Radial Load Capacity lbs Dynamic
  • 2610
  • 2800
  • 5780
  • 7340
  • 7880
  • 9750
  • 11780
• Radial Load Capacity lbs Static
  • 1440
  • 1650
  • 3490
  • 4460
  • 5210
  • 6600
  • 8150
• Maximum Speed
  • 1,250 rpm
  • 1,350 rpm
  • 1,500 rpm
  • 1,750 rpm
  • 2,000 rpm
  • 2,700 rpm
  • 3,100 rpm
• Product Description
  • Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. With a 316 stainless steel housing, these bearings won’t rust from salt water, chlorine, or chemicals. All are lubricated with NSF registered H1 grease, which is certified for incidental contact with food. Concentric-lock bearings have a collar that centers and secures the shaft in the bearing bore. To install, tighten the single screw on the collar around its inner ring on your shaft. These bearings have a secure grip on the shaft that reduces vibration and noise.
  • Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. With a 316 stainless steel housing, these bearings won’t rust from salt water, chlorine, or chemicals. All are lubricated with NSF registered H1 grease, which is certified for incidental contact with food. Set-screw bearings secure to shafts as you tighten their screw. They don’t need a collar; however, the screws leave some marring on the shaft.

Inquiry