FilterClear All

• Material
  • Acetal
  • Nylon
  • PEEK
  • PTFE
  • Plastic Blend
  • Rulon J
  • Rulon LR
• Performance
  • Dry Running
  • Dry Running, Chemical Resistant, High Load, High Temperature, Moisture Resistant
  • Dry Running, Moisture Resistant
  • Dry Running, Ultra Chemical Resistant, High Load, High Temperature, Low Temperature, Moisture Resistant
  • Dry Running, Ultra Chemical Resistant, High Load, Moisture Resistant
  • Dry Running, Ultra Low Friction, High Load, Moisture Resistant
  • Dry Running, Ultra Low Friction, Moisture Resistant
  • Dry Running, Ultra Low Friction, Ultra Chemical Resistant, High Temperature, Low Temperature
  • Dry Running, Ultra Low Friction, Ultra Chemical Resistant, High Temperature, Moisture Resistant
• For Shaft Diameter
  • 1 1/2"
  • 1 1/4"
  • 1 3/4"
  • 1 3/8"
  • 1"
  • 1/2"
  • 1/4"
  • 1/8"
  • 10 mm
  • 11 mm
  • 12 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 2"
  • 20 mm
  • 22 mm
  • 24 mm
  • 25 mm
  • 28 mm
  • 3 mm
  • 3/16"
  • 3/4"
  • 3/8"
  • 30 mm
  • 35 mm
  • 4 mm
  • 40 mm
  • 45 mm
  • 5 mm
  • 5/16"
  • 5/8"
  • 50 mm
  • 6 mm
  • 7 mm
  • 7/16"
  • 7/8"
  • 8 mm
  • 9 mm
• For Housing ID
  • 1 1/2"
  • 1 1/4"
  • 1 1/8"
  • 1 3/4"
  • 1 5/8"
  • 1"
  • 1/2"
  • 1/4"
  • 10 mm
  • 11 mm
  • 12 mm
  • 13 mm
  • 13/16"
  • 14 mm
  • 15 mm
  • 15/32"
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 19/32"
  • 2 1/4"
  • 2"
  • 20 mm
  • 21 mm
  • 22 mm
  • 23 mm
  • 23/32"
  • 24 mm
  • 25 mm
  • 26 mm
  • 28 mm
  • 3/4"
  • 3/8"
  • 30 mm
  • 32 mm
  • 38 mm
  • 39 mm
  • 4.5 mm
  • 44 mm
  • 46 mm
  • 5.5 mm
  • 5/16"
  • 5/8"
  • 50 mm
  • 55 mm
  • 56 mm
  • 6 mm
  • 7 mm
  • 7/16"
  • 7/8"
  • 8 mm
  • 9 mm
  • 9/16"
• Length
  • 1 1/2"
  • 1 1/4"
  • 1 1/8"
  • 1 3/4"
  • 1"
  • 1/2"
  • 1/4"
  • 10 mm
  • 11.5 mm
  • 12 mm
  • 14 mm
  • 14.5 mm
  • 15 mm
  • 15.5 mm
  • 16 mm
  • 17 mm
  • 2"
  • 20 mm
  • 21.5 mm
  • 22 mm
  • 23 mm
  • 25 mm
  • 26 mm
  • 3 mm
  • 3.5 mm
  • 3/4"
  • 3/8"
  • 30 mm
  • 36 mm
  • 4 mm
  • 4.5 mm
  • 40 mm
  • 5 mm
  • 5.5 mm
  • 5/16"
  • 5/8"
  • 50 mm
  • 6 mm
  • 7 mm
  • 7.5 mm
  • 7/16"
  • 7/8"
  • 8 mm
  • 9 mm
• Length Tolerance
  • -0.005" to 0.005"
  • -0.0087" to 0"
  • -0.01" to 0.01"
  • -0.0106" to 0"
  • -0.013" to 0"
  • -0.0142" to 0"
  • -0.015" to 0.015"
  • -0.0154" to 0"
  • -0.0161" to 0"
  • -0.0185" to 0"
  • -0.127 mm to 0.127 mm
  • -0.13 mm to 0.13 mm
  • -0.14 mm to 0 mm
  • -0.18 mm to 0 mm
  • -0.2 mm to 0 mm
  • -0.22 mm to 0 mm
  • -0.25 mm to 0 mm
  • -0.27 mm to 0 mm
  • -0.32 mm to 0 mm
  • -0.33 mm to 0 mm
  • -0.36 mm to 0 mm
  • -0.39 mm to 0 mm
• Flange OD
  • 0.36"
  • 0.56"
  • 1 1/16"
  • 1 1/2"
  • 1 1/4"
  • 1 1/8"
  • 1 3/16"
  • 1 3/4"
  • 1 3/8"
  • 1 5/16"
  • 1 7/16"
  • 1"
  • 1/2"
  • 10 mm
  • 11 mm
  • 11/16"
  • 12 mm
  • 14 mm
  • 15 mm
  • 15/16"
  • 16 mm
  • 17 mm
  • 17.5 mm
  • 18 mm
  • 19 mm
  • 2 1/2"
  • 2 1/4"
  • 2"
  • 20 mm
  • 21 mm
  • 22 mm
  • 23 mm
  • 24 mm
  • 25 mm
  • 26 mm
  • 27 mm
  • 28 mm
  • 29 mm
  • 3/4"
  • 3/8"
  • 30 mm
  • 32 mm
  • 34 mm
  • 35 mm
  • 36 mm
  • 39 mm
  • 44 mm
  • 46 mm
  • 47 mm
  • 5/16"
  • 5/8"
  • 52 mm
  • 56 mm
  • 58 mm
  • 60 mm
  • 62 mm
  • 63 mm
  • 7.5 mm
  • 7/16"
  • 7/8"
  • 9 mm
  • 9.5 mm
  • 9/16"
• Flange Thickness
  • 0.05"
  • 0.06"
  • 0.16"
  • 0.19"
  • 0.2"
  • 0.5 mm
  • 0.75 mm
  • 1 mm
  • 1.5 mm
  • 1/16"
  • 1/32"
  • 1/4"
  • 1/8"
  • 2 mm
  • 2.5 mm
  • 3 mm
  • 3.5 mm
  • 3/16"
  • 3/32"
  • 3/64"
  • 4 mm
  • 5 mm
  • 5/32"
• Temperature Range
  • -200° F to 450° F
  • -20° F to 180° F
  • -20° F to 210° F
  • -20° F to 250° F
  • -20° F to 450° F
  • -350° F to 500° F
  • -400° F to 500° F
  • -400° F to 550° F
  • -40° F to 150° F
  • -40° F to 170° F
  • -40° F to 175° F
  • -40° F to 180° F
  • -50° F to 190° F
  • -55° F to 190° F
• Product ID
  • 0.125"
  • 0.1262"
  • 0.1875"
  • 0.1887"
  • 0.19"
  • 0.191"
  • 0.25"
  • 0.2516"
  • 0.2525"
  • 0.253"
  • 0.254"
  • 0.3125"
  • 0.3141"
  • 0.315"
  • 0.3155"
  • 0.316"
  • 0.375"
  • 0.3766"
  • 0.377"
  • 0.378"
  • 0.379"
  • 0.4375"
  • 0.4395"
  • 0.5"
  • 0.502"
  • 0.504"
  • 0.505"
  • 0.625"
  • 0.627"
  • 0.629"
  • 0.6295"
  • 0.63"
  • 0.75"
  • 0.752"
  • 0.7525"
  • 0.755"
  • 0.7555"
  • 0.756"
  • 0.875"
  • 0.8755"
  • 0.881"
  • 1"
  • 1.002"
  • 1.0025"
  • 1.005"
  • 1.007"
  • 1.008"
  • 1.25"
  • 1.2505"
  • 1.2531"
  • 1.255"
  • 1.258"
  • 1.382"
  • 1.5"
  • 1.5005"
  • 1.506"
  • 1.508"
  • 1.759"
  • 10 mm
  • 10.1092 mm
  • 10.19 mm
  • 11 mm
  • 12 mm
  • 12.1158 mm
  • 12.19 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 17.2 mm
  • 18 mm
  • 19 mm
  • 2.011"
  • 20 mm
  • 20.1422 mm
  • 22 mm
  • 24 mm
  • 25 mm
  • 28 mm
  • 3 mm
  • 3.16 mm
  • 30 mm
  • 30.1752 mm
  • 35 mm
  • 4 mm
  • 4.16 mm
  • 40 mm
  • 40.1828 mm
  • 40.2082 mm
  • 45 mm
  • 5 mm
  • 5.16 mm
  • 50 mm
  • 50.2666 mm
  • 6 mm
  • 6.16 mm
  • 7 mm
  • 8 mm
  • 8.18 mm
  • 9 mm
  • 9.0932 mm
  • 9.18 mm
• ID Tolerance
  • -0.002" to 0.008"
  • -0.0025" to 0.0025"
  • -0.0025" to 0.008"
  • 0 mm to 0.05 mm
  • 0 mm to 0.0508 mm
  • 0 mm to 0.07 mm
  • 0 mm to 0.2032 mm
  • 0 mm to 0.21 mm
  • 0 mm to 0.2794 mm
  • 0 mm to 0.28 mm
  • 0" to 0.001"
  • 0" to 0.0018"
  • 0" to 0.002"
  • 0" to 0.0023"
  • 0" to 0.0027"
  • 0" to 0.003"
  • 0" to 0.0034"
  • 0" to 0.004"
  • 0" to 0.005"
  • 0" to 0.006"
  • 0" to 0.0069"
  • 0" to 0.008"
  • 0" to 0.05 mm
  • 0" to 0.101 mm
  • 0.001" to 0.0033"
  • 0.0013" to 0.004"
  • 0.014 mm to 0.054 mm
  • 0.02 mm to 0.068 mm
  • 0.025 mm to 0.083 mm
  • 0.032 mm to 0.102 mm
  • 0.04 mm to 0.124 mm
  • 0.05 mm to 0.15 mm
• OD
  • 0.25"
  • 0.2505"
  • 0.251"
  • 0.3125"
  • 0.313"
  • 0.315"
  • 0.375"
  • 0.3758"
  • 0.376"
  • 0.378"
  • 0.4375"
  • 0.44"
  • 0.46875"
  • 0.4698"
  • 0.47"
  • 0.5"
  • 0.501"
  • 0.5025"
  • 0.503"
  • 0.562"
  • 0.5625"
  • 0.563"
  • 0.59375"
  • 0.594"
  • 0.595"
  • 0.596"
  • 0.624"
  • 0.625"
  • 0.626"
  • 0.6262"
  • 0.627"
  • 0.628"
  • 0.719"
  • 0.72"
  • 0.7203"
  • 0.75"
  • 0.751"
  • 0.7515"
  • 0.752"
  • 0.8125"
  • 0.875"
  • 0.876"
  • 0.8768"
  • 0.877"
  • 1"
  • 1.001"
  • 1.002"
  • 1.125"
  • 1.126"
  • 1.1273"
  • 1.25"
  • 1.251"
  • 1.252"
  • 1.4995"
  • 1.5"
  • 1.501"
  • 1.626"
  • 1.75"
  • 1.751"
  • 10 mm
  • 11 mm
  • 12 mm
  • 12.05 mm
  • 13 mm
  • 13.05 mm
  • 14 mm
  • 14.0208 mm
  • 14.05 mm
  • 15 mm
  • 15.0368 mm
  • 16 mm
  • 16.05 mm
  • 17 mm
  • 18 mm
  • 18.034 mm
  • 19 mm
  • 2.001"
  • 2.251"
  • 20 mm
  • 21 mm
  • 22 mm
  • 23 mm
  • 23.05 mm
  • 24 mm
  • 25 mm
  • 26 mm
  • 26.035 mm
  • 28 mm
  • 30 mm
  • 32 mm
  • 38 mm
  • 38.0238 mm
  • 39 mm
  • 4.5 mm
  • 44 mm
  • 46.0248 mm
  • 5.5 mm
  • 50 mm
  • 50.038 mm
  • 55 mm
  • 56.0324 mm
  • 6 mm
  • 6.04 mm
  • 7 mm
  • 7.04 mm
  • 8 mm
  • 8.04 mm
  • 9 mm
  • 9.04 mm
• OD Tolerance
  • -0.0003" to 0.0003"
  • -0.00035" to 0.00035"
  • -0.001" to 0.007"
  • -0.0015" to 0.0055"
  • -0.002" to 0.008"
  • 0 mm to 0.012 mm
  • 0 mm to 0.015 mm
  • 0 mm to 0.018 mm
  • 0 mm to 0.021 mm
  • 0 mm to 0.025 mm
  • 0 mm to 0.0254 mm
  • 0 mm to 0.03 mm
  • 0 mm to 0.05 mm
  • 0 mm to 0.0508 mm
  • 0 mm to 0.0762 mm
  • 0 mm to 0.1016 mm
  • 0 mm to 0.11 mm
  • 0 mm to 0.127 mm
  • 0 mm to 0.13 mm
  • 0 mm to 0.512 mm
  • 0" to 0.001"
  • 0" to 0.002"
  • 0" to 0.003"
  • 0" to 0.004"
  • 0" to 0.005"
  • 0" to 0.006"
  • 0" to 0.008"
  • 0" to 0.05 mm
  • 0" to 0.101 mm
• P Max
  • 1,000 psi
  • 15,000 psi
  • 2,900 psi
  • 350 psi
  • 4,500 psi
  • 400 psi
  • 500 psi
  • 6,527 psi
  • 750 psi
• PV Max
  • 1,000
  • 10,000
  • 14,000
  • 2,700
  • 25,000
  • 3,000
  • 3,400
  • 7,500
• Shaft Mount Type
  • Press Fit
  • Slip Fit
• System of Measurement
  • Inch
  • Metric
• V Max
  • 1,000 sfpm
  • 100 sfpm
  • 110 sfpm
  • 216 sfpm
  • 350 sfpm
  • 360 fpm
  • 400 sfpm
  • 50 sfpm
• Country of Origin
  • Germany
  • Mexico
  • United States
• ECCN
  • 1C998
  • EAR99
• REACH Compliance
  • REACH (EC 1907/2006) (01/21/2025, 247 SVHC) Compliant
  • REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
• Schedule B Number
  • 848330.504
  • 848330.809
  • 848330.8090
• Color
  • Beige
  • Black
  • Blue
  • Gold
  • Maroon
  • White
  • Yellow
• Filler Material
  • Molybdenum Disulfide
  • Oil
• Product Description
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. High - Load Moisture - Resistant Rulon LR — Won’t swell in wet or humid places, similar to acetal, but can support higher loads. These bearings also operate smoothly from cryogenic to oven-like temperatures.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. High - Load PEEK — Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. High - Load Ultra - Chemical - Resistant Polyester Fabric - Reinforced PTFE — Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. High - Load Ultra - Low - Friction Plastic Blend — Create the least amount of friction of any bearings that we offer. They handle heavier loads than Rulon J bearings but can't withstand the same extreme temperatures.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. MDS - Filled Nylon — A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon, which will swell and weaken when exposed to moisture.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Moisture - Resistant Acetal — These bearings won’t warp or swell from humidity or direct contact with water, unlike nylon.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Moisture - Resistant Ultra - Low - Friction Plastic Blend — These bearings won't warp or swell from humidity or direct contact with water. They glide effortlessly for applications with frequent starts and stops, such as conveyor systems.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Nylon — The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Oil - Filled Nylon — Oil can’t seep out because it is locked inside the nylon. The oil resists moisture, making these the only nylon bearings suitable for wet and humid areas. Similar to MDS-filled nylon, they are slicker than standard nylon with the same great wear resistance.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Ultra - Chemical - Resistant PTFE — The most chemical-resistant bearings we offer. PTFE is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases. PTFE also reduces friction better than nylon but is not as strong.
  • Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust. Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings. Ultra - Low - Friction Rulon J — These bearings glide effortlessly for applications with frequent starts and stops, such as conveyor systems.

Inquiry