96977A516 Metric Press-Fit Drill Bushings with Head

$10.94 $16.83

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

96977A516

Additional info

Installation Type	Permanent
Drill Bushing Style	Smooth
Product ID	16 mm
OD	26 mm
Length	12 mm
For Drill Bit Size	16 mm
For Drill Bit Size Decimal Equivalent	0.6299"
Tolerance ID	0.016 to 0.034 mm
Tolerance OD	0.015 to 0.028 mm
Tolerance Length	-0.2 to 0.2 mm
Drill Bushing Type	H
Material	Steel
Hardness	Rockwell C61
RoHS	RoHS 3 (2015/863/EU) Compliant
REACH	Not Compliant
DFARS	Specialty Metals COTS-Exempt
Country of Origin	Varies
Schedule B	846620.8035
ECCN	EAR99
Specifications Met	DIN 172
Head Thickness	4 mm
Head OD	30 mm
Product Description	Even under extreme drilling pressure, these metric bushings won't press through your jig plate. They’re ANSI Type H bushings, also known as headed bushings. A flanged head acts as a stop, so these bushings won’t move as you push down your drill bit, reamer, or other cutting bit. Use them even in jigs made of thin or soft materials— the head adds support to protect your jig from damage caused by heavy use. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear, so they last for many cycles without needing to be replaced. These bushings meet DIN 172 dimensional standards. This standard is no longer active, but it’s often used as a reference point for making sure parts are compatible with other parts and tools. To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into the hole with a hydraulic or lever press.

34%

96977A516 Metric Press-Fit Drill Bushings with Head

$10.94 $16.83

Bulk orders will be discounted, please contact us.

Even under extreme drilling pressure, these metric bushings won't press through your jig plate. They’re ANSI Type H bushings, also known as headed bushings. A flanged head acts as a stop, so these bushings won’t move as you push down your drill bit, reamer, or other cutting bit. Use them even in jigs made of thin or soft materials— the head adds support to protect your jig from damage caused by heavy use. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear, so they last for many cycles without needing to be replaced. These bushings meet DIN 172 dimensional standards. This standard is no longer active, but it’s often used as a reference point for making sure parts are compatible with other parts and tools. To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into the hole with a hydraulic or lever press.

Product Number: 96977A516

Add to Wishlist Add to Compare

SEND INQUIRY

Description

Installation Type	Permanent
Drill Bushing Style	Smooth
Product ID	16 mm
OD	26 mm
Length	12 mm
For Drill Bit Size	16 mm
For Drill Bit Size Decimal Equivalent	0.6299"
Tolerance ID	0.016 to 0.034 mm
Tolerance OD	0.015 to 0.028 mm
Tolerance Length	-0.2 to 0.2 mm
Drill Bushing Type	H
Material	Steel
Hardness	Rockwell C61
RoHS	RoHS 3 (2015/863/EU) Compliant
REACH	Not Compliant
DFARS	Specialty Metals COTS-Exempt
Country of Origin	Varies
Schedule B	846620.8035
ECCN	EAR99
Specifications Met	DIN 172
Head Thickness	4 mm
Head OD	30 mm
Product Description	Even under extreme drilling pressure, these metric bushings won't press through your jig plate. They’re ANSI Type H bushings, also known as headed bushings. A flanged head acts as a stop, so these bushings won’t move as you push down your drill bit, reamer, or other cutting bit. Use them even in jigs made of thin or soft materials— the head adds support to protect your jig from damage caused by heavy use. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear, so they last for many cycles without needing to be replaced. These bushings meet DIN 172 dimensional standards. This standard is no longer active, but it’s often used as a reference point for making sure parts are compatible with other parts and tools. To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into the hole with a hydraulic or lever press.