8260K47
$37.24
$0.00
| Mounted Bearing Type | Three-Bolt Flange Mount |
| Bearing Type | Ball |
| Housing Material | Nickel-Plated Cast Iron |
| Shaft Mount Type | Set Screw |
| For Shaft Diameter | 2" |
| Center Height | 4 17/32" |
| Overall Height | 7 1/4" |
| Overall Length | 4 13/32" |
| Overall Width | 2 1/16" |
| Dynamic Radial Load Capacity | 7,850 lb. |
| Maximum Rotation Speed | 2,500 rpm |
| Bearing Material | Steel |
| Bearing Seal Type | Sealed |
| Misalignment Capability | 3° |
| ABEC Rating | Not Rated |
| Alignment Style | Self-Aligning |
| For Load Direction | Radial |
| For Shaft Type | Round |
| Grease Fitting Included | Yes |
| Product ID | 2" |
| ID Tolerance | 0" to 0.0008" |
| Lubrication | Lubricated |
| Mounting Hole Fasteners Included | No |
| Number of Set Screws Included | 2 |
| Performance | Corrosion Resistant |
| Set Screw Thread Size | 3/8"-24 |
| Static Radial Load Capacity | 5,200 lb. |
| System of Measurement | Inch |
| Temperature | 0° F to 210° F |
| Country of Origin | China |
| DFARS Compliance | Specialty Metals COTS-Exempt |
| ECCN | 1C999 |
| REACH Compliance | REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant |
| RoHS Compliance | RoHS 3 (2015/863/EU) Compliant |
| Schedule B Number | 848320.0010 |
| Flange Thickness | 23/32" |
| Mounting Hole Hole Diameter | 7/16" |
| Grease Fitting Thread Size | 1/4"-28 |
| Grease Fitting Thread Type | UNF |
| Lubricant | Grease with Lithium Thickener |
| Product Description | Smoother than smooth— the balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation. Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants. Nickel - Plated Cast Iron Housing — Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew. |
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at