6661K101 Ball Bearings1

$17.73

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

6661K101

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	10 mm
For Housing ID	30 mm
Width	9 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	17,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-30° F
Temperature Range Max	210° F
Bearing Trade Number	6200-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	10 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Grease
OD	30 mm
OD Tolerance	-0.008 mm to 0 mm
Radial Clearance	0.008 mm to 0.023 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Bulgaria, Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Seal Material	Buna-N
Dynamic Radial Load Capacity	1,200 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	530 lb.

6661K101 Ball Bearings1

$17.73 $0.00

Bulk orders will be discounted, please contact us.

Smoother than smooth— the balls inside these bearings roll nearly friction- free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor. Sealed — The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 6661K101

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	10 mm
For Housing ID	30 mm
Width	9 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	17,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-30° F
Temperature Range Max	210° F
Bearing Trade Number	6200-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	10 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Grease
OD	30 mm
OD Tolerance	-0.008 mm to 0 mm
Radial Clearance	0.008 mm to 0.023 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Bulgaria, Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Seal Material	Buna-N
Dynamic Radial Load Capacity	1,200 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	530 lb.