6660K74 Self-Aligning Ball Bearings

$277.69

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

6660K74

Additional info

For Shaft Type	Round
Bearing Construction	Double Row
Bearing Seal Type	Sealed
For Shaft Diameter	25 mm
For Housing ID	62 mm
Width	24 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	7,500 rpm
Lubrication	Lubricated
Temperature Range Minimum	-30° F
Temperature Range Max	210° F
Bearing Trade Number	2305-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Nylon
For Load Direction	Radial
Product ID	25 mm
ID Tolerance	-0.01 mm to 0 mm
Lubricant	Grease
OD	62 mm
OD Tolerance	-0.013 mm to 0 mm
Performance	Self-Aligning
Radial Clearance	0.005 mm to 0.02 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy, Malaysia
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.506
Seal Material	Buna-N
Dynamic Radial Load Capacity	4,250 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	1,200 lb.
Misalignment Capability	1.5°

6660K74 Self-Aligning Ball Bearings

$277.69 $0.00

Bulk orders will be discounted, please contact us.

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration. Sealed — The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 6660K74

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Double Row
Bearing Seal Type	Sealed
For Shaft Diameter	25 mm
For Housing ID	62 mm
Width	24 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	7,500 rpm
Lubrication	Lubricated
Temperature Range Minimum	-30° F
Temperature Range Max	210° F
Bearing Trade Number	2305-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Nylon
For Load Direction	Radial
Product ID	25 mm
ID Tolerance	-0.01 mm to 0 mm
Lubricant	Grease
OD	62 mm
OD Tolerance	-0.013 mm to 0 mm
Performance	Self-Aligning
Radial Clearance	0.005 mm to 0.02 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy, Malaysia
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.506
Seal Material	Buna-N
Dynamic Radial Load Capacity	4,250 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	1,200 lb.
Misalignment Capability	1.5°