57155K459 Flanged Ball Bearings

$13.34

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

57155K459

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Open
For Shaft Diameter	5 mm
For Housing ID	10 mm
Width	3 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	71,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-50° F
Temperature Range Max	300° F
Bearing Trade Number	105
Ball Bearing Profile	Flanged
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	5 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Oil
OD	10 mm
OD Tolerance	-0.007 mm to 0 mm
Radial Clearance	0.005 mm to 0.01 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Dynamic Radial Load Capacity	90 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	35 lb.
Flange OD	11.2 mm
Flange Thk	0.6 mm

57155K459 Flanged Ball Bearings

$13.34 $0.00

Bulk orders will be discounted, please contact us.

Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off- kilter. Open — With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 57155K459

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Open
For Shaft Diameter	5 mm
For Housing ID	10 mm
Width	3 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	71,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-50° F
Temperature Range Max	300° F
Bearing Trade Number	105
Ball Bearing Profile	Flanged
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	5 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Oil
OD	10 mm
OD Tolerance	-0.007 mm to 0 mm
Radial Clearance	0.005 mm to 0.01 mm
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Dynamic Radial Load Capacity	90 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	35 lb.
Flange OD	11.2 mm
Flange Thk	0.6 mm