4481N38 Ball Bearings1

$167.11

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

4481N38

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	60 mm
For Housing ID	110 mm
Width	22 mm
Width Tolerance	-0.15 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	6,300 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	6212-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	60 mm
ID Tolerance	-0.012 mm to 0 mm
Lubricant	Grease
OD	110 mm
OD Tolerance	-0.013 mm to 0 mm
Radial Clearance	0.023 mm to 0.043 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	United States
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5004
Shield Material	Steel
Dynamic Radial Load Capacity	12,400 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	8,050 lb.

4481N38 Ball Bearings1

$167.11 $0.00

Bulk orders will be discounted, please contact us.

Smoother than smooth— the balls inside these bearings roll nearly friction- free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 4481N38

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	60 mm
For Housing ID	110 mm
Width	22 mm
Width Tolerance	-0.15 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	6,300 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	6212-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	60 mm
ID Tolerance	-0.012 mm to 0 mm
Lubricant	Grease
OD	110 mm
OD Tolerance	-0.013 mm to 0 mm
Radial Clearance	0.023 mm to 0.043 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	United States
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5004
Shield Material	Steel
Dynamic Radial Load Capacity	12,400 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	8,050 lb.