4481N11 Ball Bearings1

$15.73

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

4481N11

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	7 mm
For Housing ID	19 mm
Width	6 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	43,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	607-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	7 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Grease
OD	19 mm
OD Tolerance	-0.008 mm to 0 mm
Radial Clearance	0.008 mm to 0.023 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5004
Shield Material	Steel
Dynamic Radial Load Capacity	530 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	210 lb.

4481N11 Ball Bearings1

$15.73 $0.00

Bulk orders will be discounted, please contact us.

Smoother than smooth— the balls inside these bearings roll nearly friction- free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 4481N11

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	7 mm
For Housing ID	19 mm
Width	6 mm
Width Tolerance	-0.12 mm to 0 mm
ABEC Rating	3
Material	Steel
Maximum Rotation Speed	43,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	607-2Z
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	7 mm
ID Tolerance	-0.007 mm to 0 mm
Lubricant	Grease
OD	19 mm
OD Tolerance	-0.008 mm to 0 mm
Radial Clearance	0.008 mm to 0.023 mm
Radial Clearance Trade Number	C3
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Italy
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	EAR99
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5004
Shield Material	Steel
Dynamic Radial Load Capacity	530 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	210 lb.