4390N162 Flanged Ball Bearings

$32.31

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

4390N162

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	21 mm
Width	7 mm
Width Tolerance	-0.13 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	30,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-50° F
Temperature Range Max	300° F
Bearing Trade Number	63801-2Z
Ball Bearing Profile	Flanged
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.011 mm to 0 mm
Lubricant	Grease
OD	21 mm
OD Tolerance	-0.011 mm to 0 mm
Radial Clearance	0.0051 mm to 0.0203 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Shield Material	Steel
Dynamic Radial Load Capacity	430 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	230 lb.
Flange OD	23 mm
Flange Thk	1.5 mm

4390N162 Flanged Ball Bearings

$32.31 $0.00

Bulk orders will be discounted, please contact us.

Install these bearings inside a housing and they won't budge. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off- kilter. Shielded — The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 4390N162

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Shielded
For Shaft Diameter	12 mm
For Housing ID	21 mm
Width	7 mm
Width Tolerance	-0.13 mm to 0 mm
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	30,000 rpm
Lubrication	Lubricated
Temperature Range Minimum	-50° F
Temperature Range Max	300° F
Bearing Trade Number	63801-2Z
Ball Bearing Profile	Flanged
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	12 mm
ID Tolerance	-0.011 mm to 0 mm
Lubricant	Grease
OD	21 mm
OD Tolerance	-0.011 mm to 0 mm
Radial Clearance	0.0051 mm to 0.0203 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Metric
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5044
Shield Material	Steel
Dynamic Radial Load Capacity	430 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	230 lb.
Flange OD	23 mm
Flange Thk	1.5 mm