3760T254 Ball Bearings1

$105.62

Quantity:

Add to Cart

Send a Inquiry

Add to Wishlist

Product Number:

3760T254

Additional info

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	1 1/4"
For Housing ID	2 1/4"
Width	1/2"
Width Tolerance	-0.0047" to 0"
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	7,500 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	R20-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	1.25"
ID Tolerance	-0.0005" to 0"
Lubricant	Grease
OD	2.25"
OD Tolerance	-0.0005" to 0"
Radial Clearance	0.002 mm to 0.013 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Inch
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5052
Seal Material	Buna-N
Dynamic Radial Load Capacity	3,150 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	2,050 lb.

3760T254 Ball Bearings1

$105.62 $0.00

Bulk orders will be discounted, please contact us.

Smoother than smooth— the balls inside these bearings roll nearly friction- free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor. Sealed — The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through. Steel — Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust. ABEC Rating — Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

Product Number: 3760T254

Add to Wishlist Add to Compare

SEND INQUIRY

Description

For Shaft Type	Round
Bearing Construction	Single Row
Bearing Seal Type	Sealed
For Shaft Diameter	1 1/4"
For Housing ID	2 1/4"
Width	1/2"
Width Tolerance	-0.0047" to 0"
ABEC Rating	1
Material	Steel
Maximum Rotation Speed	7,500 rpm
Lubrication	Lubricated
Temperature Range Minimum	-20° F
Temperature Range Max	230° F
Bearing Trade Number	R20-2RS
Ball Bearing Profile	Standard
Ball Material	Steel
Bearing Type	Ball
Cage Material	Steel
For Load Direction	Radial
Product ID	1.25"
ID Tolerance	-0.0005" to 0"
Lubricant	Grease
OD	2.25"
OD Tolerance	-0.0005" to 0"
Radial Clearance	0.002 mm to 0.013 mm
Radial Clearance Trade Number	C0
Shaft Mount Type	Press Fit
System of Measurement	Inch
Country of Origin	Japan
DFARS Compliance	Specialty Metals COTS-Exempt
ECCN	1C999
REACH Compliance	REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
RoHS Compliance	RoHS 3 (2015/863/EU) Compliant
Schedule B Number	848210.5052
Seal Material	Buna-N
Dynamic Radial Load Capacity	3,150 lb.
Inner Ring Type	Standard
Static Radial Load Capacity	2,050 lb.