2010N18
$1374.61
$0.00
| For Load Direction | Combined Radial, Thrust, and Moment |
| Bearing Seal Type | Sealed |
| Ring Material | Steel |
| For Shaft Diameter | 20 mm |
| For Housing ID | 70 mm |
| Width | 12 mm |
| Width Tolerance | -0.075 mm to 0 mm |
| Maximum Rotation Speed | 1,300 rpm |
| Lubrication | Lubricated |
| Temperature Range | 0° F to 210° F |
| Bearing Construction | Single Row |
| Bearing Type | Roller |
| For Shaft Type | Round |
| Product ID | 20 mm |
| ID Tolerance | -0.01 mm to 0 mm |
| Lubricant | Grease |
| OD | 70 mm |
| Roller Bearing Type | Crossed |
| Roller Material | Steel |
| Seal Material | Buna-N |
| Shaft Mount Type | Press Fit |
| System of Measurement | Metric |
| Country of Origin | Japan, Vietnam |
| DFARS Compliance | Specialty Metals COTS-Exempt |
| ECCN | EAR99 |
| REACH Compliance | REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant |
| RoHS Compliance | RoHS 3 (2015/863/EU) Compliant |
| Schedule B Number | 848250 |
| OD Tolerance | -0.013 mm to 0 mm |
| Features | Lubrication Groove, Two Lubrication Holes |
| Combined Load Capacity Dynamic | 1,700 lbf |
| Combined Load Capacity Static | 1,850 lbf |
| Performance | High Load |
| Outer Ring Mounting Hole Number of Mounting Holes | 6 |
| Inner Ring Mounting Hole Mounting Hole Thread Size | M3 |
| Inner Ring Mounting Hole Mounting Hole Thread Pitch | 0.5 mm |
| Outer Ring Mounting Hole Bolt Circle Diameter | 57 mm |
| Outer Ring Mounting Hole Mounting Hole Location | Outer Ring |
| Mounting Fasteners Included | No |
| Inner Ring Mounting Hole Number of Mounting Holes | 6 |
| Inner Ring Mounting Hole Bolt Circle Diameter | 28 mm |
| Inner Ring Mounting Hole Mounting Hole Location | Inner Ring |
| Outer Ring Mounting Hole For Mounting Fastener Thread Size | M3 |
| Outer Ring Mounting Hole Mounting Hole Diameter | 3.4 mm |
| Outer Ring Mounting Hole Mounting Hole Counterbore Depth | 3.3 mm |
| Outer Ring Mounting Hole Mounting Hole Counterbore Diameter | 6.5 mm |
| Product Description | With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots. Sealed Bearing — Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat. |
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at
Lorem Ipsum is simply dummy text of the printing and typesetting industry It is a long established fact that a will be distracted by the readable of at