FilterClear All

• Housing Material
  • Nickel-Plated Cast Iron
  • PEEK
  • Polyester Plastic
  • Powder-Coated Cast Iron
• Shaft Mount Type
  • Clamp On
  • Eccentric Lock
  • Press Fit
  • Set Screw
• For Shaft Diameter
  • 1 1/16"
  • 1 1/2"
  • 1 1/4"
  • 1 1/8"
  • 1 11/16"
  • 1 15/16"
  • 1 3/16"
  • 1 3/4"
  • 1 3/8"
  • 1 7/16"
  • 1"
  • 1/2"
  • 1/4"
  • 1/8"
  • 15/16"
  • 17 mm
  • 2 1/4"
  • 2 3/16"
  • 2 7/16"
  • 2"
  • 20 mm
  • 25 mm
  • 3/16"
  • 3/4"
  • 3/8"
  • 30 mm
  • 35 mm
  • 40 mm
  • 45 mm
  • 5/16"
  • 5/8"
  • 50 mm
  • 7/8"
• Overall Height
  • 1 35/64"
  • 104.8 mm
  • 111.1 mm
  • 116 mm
  • 2 11/16"
  • 2 3/4"
  • 2 3/8"
  • 2 33/64"
  • 27/32"
  • 29/32"
  • 3 1/8"
  • 3 3/4"
  • 3 5/32"
  • 3 5/8"
  • 3 9/64"
  • 4 1/8"
  • 4 3/8"
  • 4 9/16"
  • 5 1/4"
  • 5 7/16"
  • 5/8"
  • 57 mm
  • 60.3 mm
  • 60.5 mm
  • 69.9 mm
  • 70 mm
  • 82.6 mm
  • 83 mm
  • 95.3 mm
• Overall Length
  • 1 1/2"
  • 1 11/32"
  • 1 3/8"
  • 1 5/32"
  • 111.9 mm
  • 112 mm
  • 123.8 mm
  • 124 mm
  • 141.3 mm
  • 141.5 mm
  • 155.6 mm
  • 171.5 mm
  • 179.4 mm
  • 189 mm
  • 2 1/8"
  • 3 55/64"
  • 3 7/8"
  • 4 1/2"
  • 4 7/16"
  • 4 7/8"
  • 5 1/8"
  • 5 13/16"
  • 5 5/32"
  • 5 53/64"
  • 5 9/16"
  • 6 1/8"
  • 6 3/4"
  • 7 1/16"
  • 7 7/16"
  • 8 1/2"
  • 9 1/4"
  • 98.5 mm
• Overall Width
  • 1 1/2"
  • 1 1/4"
  • 1 13/16"
  • 1 13/32"
  • 1 15/32"
  • 1 17/32"
  • 1 19/32"
  • 1 19/64"
  • 1 21/32"
  • 1 29/32"
  • 1 3/8"
  • 1 33/64"
  • 1 43/64"
  • 1 45/64"
  • 1 5/16"
  • 1 5/8"
  • 1 53/64"
  • 1 7/8"
  • 11/32"
  • 19/64"
  • 2 1/16"
  • 2 11/64"
  • 2 15/32"
  • 2 23/32"
  • 2 29/32"
  • 2 3/16"
  • 2 3/8"
  • 2 37/64"
  • 2 5/64"
  • 2 5/8"
  • 2 7/32"
  • 2 9/32"
  • 2"
  • 3/8"
  • 31/64"
  • 32.5 mm
  • 36.5 mm
  • 39.1 mm
  • 39.7 mm
  • 42.5 mm
  • 44.5 mm
  • 46.7 mm
  • 5/16"
  • 50.1 mm
  • 51.2 mm
  • 52 mm
  • 60.6 mm
• Dynamic Radial Load Capacity
  • 11,800 lb.
  • 120 lb.
  • 125 lb.
  • 2,100 lb.
  • 2,150 lb.
  • 2,600 lb.
  • 2,800 lb.
  • 2,850 lb.
  • 2,870 lb.
  • 235 lb.
  • 270 lb.
  • 290 lb.
  • 3,100 lb.
  • 3,140 lb.
  • 380 lb.
  • 4,350 lb.
  • 4,380 lb.
  • 5,700 lb.
  • 5,750 lb.
  • 6,900 lb.
  • 7,300 lb.
  • 7,450 lb.
  • 7,850 lb.
  • 7,900 lb.
  • 740 lb.
  • 80 lb.
  • 9,750 lb.
  • 9,800 lb.
• Maximum Rotation Speed
  • 3,200 rpm
  • 3,400 rpm
  • 3,600 rpm
  • 3,800 rpm
  • 32,000 rpm
  • 36,000 rpm
  • 38,000 rpm
  • 4,000 rpm
  • 4,100 rpm
  • 4,300 rpm
  • 4,600 rpm
  • 4,800 rpm
  • 40,000 rpm
  • 5,000 rpm
  • 5,100 rpm
  • 5,300 rpm
  • 5,400 rpm
  • 5,800 rpm
  • 53,000 rpm
  • 6,300 rpm
  • 6,500 rpm
  • 690 rpm
  • 7,000 rpm
  • 7,300 rpm
  • 700 rpm
  • 8,500 rpm
  • 800 rpm
  • 9,000 rpm
  • 9,500 rpm
• Bearing Material
  • 316 Stainless Steel
  • 440C Stainless Steel
  • Steel
• Bearing Seal Type
  • Open
  • Sealed
  • Shielded
• Misalignment Capability
  • 1.5°
  • 2°
• ABEC Rating
  • 1
  • Not Rated
• Alignment Style
  • Fixed
  • Self-Aligning
• Grease Fitting Included
  • No
  • Yes
• Product ID
  • 0.125"
  • 0.1875"
  • 0.25"
  • 0.3125"
  • 0.375"
  • 0.5"
  • 0.625"
  • 0.75"
  • 0.875"
  • 0.9375"
  • 1"
  • 1.0625"
  • 1.125"
  • 1.1252"
  • 1.1875"
  • 1.25"
  • 1.375"
  • 1.4375"
  • 1.5"
  • 1.6875"
  • 1.75"
  • 1.9375"
  • 17 mm
  • 2"
  • 2.1875"
  • 2.25"
  • 2.4375"
  • 20 mm
  • 25 mm
  • 30 mm
  • 35 mm
  • 40 mm
  • 45 mm
  • 50 mm
• ID Tolerance
  • -0.0004" to 0"
  • -0.0005" to 0"
  • -0.002" to 0.002"
  • 0 mm to 0.016 mm
  • 0 mm to 0.018 mm
  • 0" to 0.0007"
  • 0" to 0.003"
  • 0.0002" to 0.0006"
  • 0.0002" to 0.0007"
  • 0.0002" to 0.0008"
  • 0.005 mm to 0.015 mm
  • 0.005 mm to 0.018 mm
  • 0.005 mm to 0.019 mm
• Lubrication
  • Lubricated
  • Required
• Mounting Hole Hole Center to Center
  • 1 3/32"
  • 1 5/8"
  • 116.5 mm
  • 116.7 mm
  • 130.2 mm
  • 143.7 mm
  • 148.4 mm
  • 15/16"
  • 157 mm
  • 3 17/32"
  • 3 35/64"
  • 3 57/64"
  • 3 7/8"
  • 3"
  • 3/4"
  • 31/32"
  • 4 19/32"
  • 4 39/64"
  • 5 1/8"
  • 5 21/32"
  • 5 27/32"
  • 5 53/64"
  • 5 7/64"
  • 6 3/16"
  • 7 1/4"
  • 7 61/64"
  • 76.5 mm
  • 89.7 mm
  • 90 mm
  • 98.8 mm
  • 99 mm
• Number of Set Screws Included
  • 1
  • 2
• Performance
  • Corrosion Resistant
  • Highly Corrosion Resistant, Chemical Resistant
• Set Screw Thread Size
  • 1/4"-20
  • 1/4"-28
  • 10-32
  • 3/8"-24
  • 5/16"-24
  • 7/16"-20
  • M10
  • M6
  • M8
• Static Radial Load Capacity
  • 1,050 lb.
  • 1,400 lb.
  • 1,450 lb.
  • 1,490 lb.
  • 1,650 lb.
  • 1,750 lb.
  • 1,760 lb.
  • 110 lb.
  • 150 lb.
  • 180 lb.
  • 2,500 lb.
  • 2,540 lb.
  • 2,550 lb.
  • 230 lb.
  • 250 lb.
  • 280 lb.
  • 3,400 lb.
  • 3,450 lb.
  • 310 lb.
  • 4,250 lb.
  • 4,450 lb.
  • 4,850 lb.
  • 5,100 lb.
  • 5,200 lb.
  • 50 lb.
  • 6,500 lb.
  • 6,600 lb.
  • 8,050 lb.
• System of Measurement
  • Inch
  • Metric
• Temperature
  • -140° F to 480° F
  • -20° F to 210° F
  • -20° F to 220° F
  • -30° F to 180° F
  • -40° F to 200° F
  • 0° F to 210° F
• Country of Origin
  • China
  • Italy
  • Italy, Serbia
  • Mexico
  • Serbia
  • Serbia, United States
  • United States
• REACH Compliance
  • Not Compliant
  • REACH (EC 1907/2006) (01/21/2025, 247 SVHC) Compliant
  • REACH (EC 1907/2006) (06/27/2024, 241 SVHC) Compliant
  • REACH (EC 1907/2006) (11/07/2024, 242 SVHC) Compliant
• RoHS Compliance
  • Not Compliant
  • RoHS 3 (2015/863/EU) Compliant
• Schedule B Number
  • 848320.001
  • 848320.0010
• Flange Thickness
  • 1/2"
  • 11 mm
  • 11.1 mm
  • 11/64"
  • 12 mm
  • 13 mm
  • 13.5 mm
  • 13/16"
  • 13/64"
  • 14.3 mm
  • 15 mm
  • 17/32"
  • 3/16"
  • 7/16"
  • 9/16"
• Mounting Hole Hole Diameter
  • 1/2"
  • 10.3 mm
  • 11.5 mm
  • 11.9 mm
  • 11/16"
  • 11/64"
  • 13.5 mm
  • 15.1 mm
  • 15/32"
  • 17/32"
  • 18 mm
  • 19/32"
  • 21/32"
  • 25/64"
  • 3/16"
  • 7/16"
  • 9/16"
• Clamping Screw Thread Size
  • 1/4"-20
  • 10-24
  • 8-32
• Grease Fitting Thread Type
  • NPT
  • UNF
• Lubricant
  • Grease with Lithium Thickener
  • Oil
• Manufacturer
  • McMaster-Carr Approved
  • SKF
  • Sealmaster
• Set Screw Thread Pitch
  • 0.75 mm
  • 1 mm
• Product Description
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Nickel - Plated Cast Iron Housing — Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. PEEK Housing — PEEK resists harsh chemicals and won’t melt or deform at high temperatures. These housings are highly wear- resistant, but they may crack or dent from hard impacts and vibrations. Press Fit — For a tight connection to the shaft, install with a press or by heating and then cooling the bearing. Also known as an interference fit.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Polyester Plastic Housing — Lightweight and naturally rust- resistant, with a smooth surface that's easy to wipe clean. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Powder - Coated Cast Iron Housing — A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust. Clamp On — Tighten the clamping screw to close the collar around your shaft for a secure, mar-free grip. The collar centers the shaft, decreasing vibration and allowing for higher speeds than set screws. Also known as concentric lock bearings. Sealmaster — Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Powder - Coated Cast Iron Housing — A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust. Eccentric Lock — An off-center opening wedges against the shaft to grip it as it turns. Eccentric locks won't mar the shaft like a set screw, but the shaft will only rotate in one direction, so they aren't suitable for applications where the load will be reversed. SKF — Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Powder - Coated Cast Iron Housing — A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. SKF — Manufactured in Europe with a strong focus on precision. The more precise the bearing, the more efficiently it will run. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
  • Smoother than smooth— the balls inside these bearings roll nearly friction- free. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing. Lubricate regularly to keep your bearing in tip-top shape. Bearings with seals and shields keep lubricants in and contaminants out, and come packed with grease. Open bearings require initial lubrication and offer less protection against dust and debris. Powder - Coated Cast Iron Housing — A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust. Set Screw — Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces. Sealmaster — Famous for exceptional sealing, Sealmaster bearings include a signature three-part seal in the inner ring. This design blocks out gritty debris and purges old grease to extend the life of the bearing. Misalignment Capability — Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

Inquiry